Sonar Pipe Sewer Inspection Equipment / Pipeline Cctv Inspection Camera
Pipe Sewer Inspection Equipment Introduction
Generally CCTV combined with sonar is used for internal condition inspection or assessment where depth of flow of sewage varies from 25% to 75% of overall sewer diameter for sewers greater than500mm in diameter. The sewer under water can be scanned by the sonar while above water can be inspected by the camera system to generate the video inspection report. The device, utilized two inspection systems, makes a new era on the way of pipeline inspection.
Pipe Sewer Inspection Equipment Features:
CCTV & Sonar Inspection together
CCTV and sonar image display on the same screen
Data and images saved in the hard disc
Built-in roll and pitch angle sensors
Built-in cable counter interface
Inspect pipe profile automatically
Sonar Probe Technical Parameter
| Acoustic Parameter |
Acoustical frequency | 2MHz |
Wave width | 1.1°(cone wave beam) |
Lateral resolution |
0.5mm (Pipe radius 125mm) |
| Max. inspection radius | 12m |
| Transmit pulse width | 4~20us |
Receiving wave width | 500KHz |
Pan&Tilt Camera JT2000
1, 360 degree, no limited rotate
2, The lens heating can prevent fog
3, Camera light can be adjusted
4, Maximum Brightness upgrade 50%, More suitable for small diameter
5, Optional Laser, calibrate defect size
ZK200 Control |Unit
Control pane: control of crawler speed, direction, camera focusing, rotation, light intensity, camera up and down, clutch, the control box can be took out separately and do operation by a DB9 wire.
Power: AC 220V
Output: PAL mode
Waterproof: IP63
Camera control: a key center control
Data output: distance, time live display, pressure, inclination, elevator height animation display.
Resolution: 800*640
Resolution: 1024*768
Weight: 20kg
Manual Cable Drum:
Counter: high precision coder( ±0.1m), cable length calculation.
Layering: manual layering
Waterproof: IP63
The company has set up Marketing, R&D, Machining, Administration, Finance, Purchasing, QC, After-Sales Departments, owns employees over 50, and all kinds of equipments over 20 sets, among it, the machining department owns a serial of machining equipments: Three-headed CNC (VMC serial), digital control lathe (CK serial), digital control miller, common lathe, common miller etc. The company also introduced and applied sophisticated instruments like 3D printer to prove design. The abundant manufacturing and machining equipments provides the source power to our product design, quantity production and fast OEM/ODM customer made solutions.
